皇冠体育227

It鈥檚 finally springtime, which brings with it sunshine, blooms, light showers, and warmth.

Though a relief after a long 飞颈苍迟别谤鈥檚 short days, spring also presents a perfect storm of elements that could damage or clog your air compressor 鈥� higher heat, increased humidity levels, and airborne particulates.

With the advent of spring cleaning upon us, now is an ideal time to conduct an annual assessment on your air compressor and ensure that it鈥檚 prepared to handle the inbound challenges of summer. Follow these five guidelines when cleaning your air compressor to keep your model running at peak performance:

1. Look for Varnish 

The insidious 鈥� and oft invisible 鈥� damage done by varnish eludes some compressor owners for two reasons: they either think they are not at risk or do not realize that the wear and tear incurred by varnish compounds gradually and is therefore not immediately apparent.

Varnish is an umbrella term that, , 鈥渂roadly describes the by-products of lubricant degradation.鈥� No matter how high the quality of your lubricant, some degradation is inevitable, and it is imperative to routinely evaluate your air compression system for deterioration due to varnish build-up.  

Timely assessment is particularly important because varnish can worsen through a positive feedback loop with high heat. As varnish accumulates, degradation taxes the air compression system and causes it to run overly hot. However, overheating exacerbates lubricant degradation in turn because of the Arrhenius rate rule, which explains that for every 18 degrees Fahrenheit that lubricant temperature increases the oil oxidation rate doubles (meaning the lubricant鈥檚 lifespan is halved, causing further degradation and higher machine heat).

To stop this cycle, or to preempt it entirely, analyze your oil 鈥� particularly its total acid number, metal counts, and viscosity 鈥� and change it when these properties indicate it has reached the end of its rated life. When cleaning varnish, consider incorporating off-line filtration into your compressed air system or add top-treat cleaner to your oil as appropriate.

According to Air Best Practices, a case study undertaken by . found that machines using varnish cleaner used three to five percent less energy, reduced operating temperature up to five degrees Fahrenheit, and saved an average of 1600 dollars鈥� worth of utilities per year.  

2. Stay Aware of Humidity Load

While many compressed air users are already vigilant about the water vapor in their system and have installed air dryers for draining after coolers, not everyone knows how much the amount of moisture in a system can vary with the changing seasons. In fact, every time air temperature increases by 20 degrees Fahrenheit, .

Given the rising temperatures that accompany spring and summer, air compressors will be battling more moisture in these seasons. When a compressed air system fails to dry its air completely, water can corrode pipes, become a lubricant solvent, and clog filters or point-of-use devices with the (potentially contaminating) particulate it carries.

Make sure that your drying systems are properly sized and functioning properly during high-humidity months to avoid water damage to your compressed air system. To troubleshoot a rotary screw or vane compressor struggling with excess moisture in the air stream, ensure that inlet and ambient temperatures do not exceed the dryer ratings and that the water separator and dryer drains are properly and routinely ejecting the condensate. 

3. Check Your Filters

Spring brings more airborne particulate matter into your air compressor. One of the simplest air compressor maintenance mistakes, forgetting to check filters periodically can lead to underperformance in the form of increased energy intake and decreased volumetric air production.

While air filters should be serviced at least once per six months when the unit is running regularly, springtime ushers in additional pollen and natural debris that can clog filters, making it the perfect time to clean or change them more frequently.  

4. Search for Potential Leaks

Not all air leaks are easily detectable. In fact, some are inaudible and small enough that PSI indicators do not always fall low enough to sound the alarm. Nevertheless, even small leaks reduce the efficiency of your compressed air system, ultimately driving up energy usage and the cost of air output while running down the machinery.

To discover any potential leaks in your system, listen carefully, double-check common leak areas (such as hoses, condensate traps and pipe connections), and consider investing in an ultrasonic leak detector.

5. Don鈥檛 Run Your Machine Ragged 

In addition to other elements that can cause your compressed air system to overheat or overexert itself 鈥� varnish build-up, clogged filters, blocked vents, subtle leaks, and corrosive moisture 鈥� an air compressor鈥檚 energy source can also cause damage if it is not calibrated to the machine鈥檚 rating.

When inspecting your compressed air system, assessing energy intake is a foundational step. Should the electrical voltage your machinery receives exceed its capacity, it could breakdown the motor windings and introduce an electrical short and, cease running altogether.

Many compressed air system components interact to affect air compression performance, and untangling which element is impacting your system can be difficult. In the end, even meticulous maintenance can only promise an outcome as good as the product itself. To ensure you have a reliable supply of clean, powerful compressed air, invest in a high-quality rotary vane compressor and, if you desire oil-free air, consider adding the 皇冠体育227 Absolute Zero (MAZ) Oil-Free Air System to an oil-lubricated vane or screw compressor and, should you have any questions about spring cleaning or maintenance throughout the year, contact your local distributor.